

UV/IR flame detection with strong false-alarm immunity
Omniguard® model 860 Ultraviolet-infrared Flame Detector
The Omniguard model 860 UV/IR flame detector senses ultraviolet and infrared radiation for very early fire detection. Its Fire Event Analysis algorithm helps distinguish real fire from non-fire events, while available hydrocarbon-only and hydrocarbon/non-hydrocarbon versions support broad fuel coverage.
- Combined ultraviolet and infrared sensing
- Patented Fire Event Analysis algorithm
- 120-degree field of view
- Hydrocarbon and selected non-hydrocarbon fire options
- Automatic through-the-lens self-test
Specifications
Key performance and electrical/mechanical specifications for Model 860
Performance
| Flame types detected | Hydrocarbon flames and selected non-hydrocarbon flames when special dual-pass IR sensor is used. |
| Certified response time | Saturating signal source in 50 ms. |
| Gasoline fire | 1 sq ft gasoline fire at 50 ft in 1 second. |
| Aviation fuel fire | 4 sq ft aviation fuel fire at 100 ft in 2 seconds or less; 100 sq ft aviation fuel fire at 250 ft in 3 seconds or less. |
| Horizontal field of view | 120 degrees. |
Optical response
| UV spectral response | Ultraviolet peak sensitivity of 0.22 um. |
| IR spectral response | Standard infrared peak sensitivity of 4.4 um. |
| Dual-pass IR option | Dual-pass peak sensitivities of 2.9 um and 4.4 um. |
Electrical
| Supply voltage | Nominal 24 VDC, range 20-32 VDC. |
| Power consumption | Standby 42 mA; standby 4-20 mA 47 mA; alarm 57 mA; auto test 136 mA; manual test 160 mA. |
| Interfaces | Two fire/trouble relays, 0-20 mA current loop, and RS485 User Interface (UI). |
Operating limits
| Operating temperature | -40C to +85C. |
| Operating humidity | 0-95% RH non-condensing, withstands up to 100% RH for short periods. |
Mechanical
| Dimensions (H x W x D) | 114 x 140 x 153 mm. |
| Weight | 2.4 kg aluminum; 6.3 kg stainless steel. |
| Conduit entry | 3/4-14 NPT or M20-1.5. |
| Housing materials | Aluminum or stainless steel. |
Configuration
| Model | 860 |
| Product type | Ultraviolet-infrared flame detector |
| Product type definition | Flame Detectors (flame) |
| Ordering format | [MODEL]-X X X X X |
| Fire type | 0 – Hydrocarbon; 1 – Hydrocarbon/non-hydrocarbon |
| Housing material/conduit entry | 0 – Aluminum, 3/4-14 NPT (white); 2 – Stainless steel, 3/4-14 NPT; 3 – Aluminum, M20-1.5 (white); 5 – Stainless steel, M20-1.5 |
| Test feature | 1 – Auto self-test |
| Fire relay configuration | 0 – Latching; 1 – Non-latching |
| Approvals | 0 – FM, CSA, IECEx, ATEX, SIL2, UKCA, ECAS-Ex, PESO, CE, EMC, LVD |
Why Model 860
Model 860 product highlights
UV/IR detection
Combines ultraviolet and infrared sensing for very early flame detection.
False-alarm immunity
Fire Event Analysis helps separate real fire signatures from non-fire events.
Fuel flexibility
Available for hydrocarbon fires only or for hydrocarbon and certain non-hydrocarbon fires.
120-degree field of view
Wide horizontal field of view supports coverage of larger areas.
Long-range detection
Third-party performance includes large aviation-fuel fires at extended distances.
Through-the-lens self-test
Automatic diagnostic self-test monitors detector sensing ability and reports fault conditions.
Rugged housing
Weatherproof, explosion-proof enclosure supports harsh indoor and outdoor industrial environments.
Field-configurable outputs
Relays and sensitivity settings can be configured for site-specific operation.
Global approvals
Approved for regulated and hazardous areas, including FM, CSA, IECEx, ATEX, SIL2, UKCA, ECAS-Ex, and PESO.
Warranty coverage
Includes five-year sensor warranty and three-year component/manufacturing defect warranty from date of delivery.
Accessories
Mounting, shields, and add-ons to fit your installation environment.
Applications
Typical installation environments for Model 860
Ready to configure Model 860?
Use the configurator to choose the right version and options for your site, then request a quote.
















