Omniguard® model 660 Utraviolet Flame Detector

The Omniguard model 660 UV flame detector senses ultraviolet radiation for extremely fast fire detection. It detects both hydrocarbon and non-hydrocarbon fires, is available in industrial-temperature and high-temperature versions, and includes automatic self-test monitoring for industrial applications such as turbine enclosures, powerplants, compressor stations, LPG facilities, LNG facilities, and engine test cells.

  • Available in industrial-temperature and high-temperature versions
  • Detects hydrocarbon and non-hydrocarbon flames
  • 120-degree field of view
  • Automatic through-the-lens self-test
  • Explosion-proof, weatherproof enclosure

Performance

Flame types detectedHydrocarbon and non-hydrocarbon flames.
Certified response time15 ms to saturating signal source, third-party certified.
Typical detection1 sq ft gasoline flame at 50 ft in 1 second, typical.
Horizontal field of view120 degrees.
Spectral responseUV peak sensitivity 0.22 um.

Operating limits

Operating temperature (industrial temperature)-40C to +85C (-40F to +185F).
Operating temperature (high temp)-40C to +125C (-40F to +257F).
Operating humidity0-95% RH non-condensing, withstands up to 100% RH for short periods.

Electrical

Supply voltageNominal 24 VDC, range 20-32 VDC.
Power consumption (industrial temperature)Standby 42 mA; standby 4-20 mA 47 mA; alarm 56 mA; auto test 136 mA; manual test 159 mA.
Power consumption (high temp)Standby 56 mA; alarm 94 mA; auto test 140 mA; manual test 193 mA.

Outputs & interfaces

RelaysTwo fire/trouble relays with hermetically sealed dry contacts. Fire relay is user-selectable latching or non-latching.
Relay rating (standard)2 A at 30 VDC, user-selectable NO or NC.
Relay rating (high temp)4 A at 30 VDC, user-selectable NO or NC.
Current loop (standard)0-20 mA output, status mapping per datasheet.
RS485RS485 User Interface (UI).

Mechanical

Dimensions (H x W x D)114 x 140 x 153 mm (4.5 x 5.5 x 6.0 in).
Weight2.4 kg aluminum; 6.3 kg stainless steel.
Conduit entry3/4-14 NPT or M20-1.5.
Housing materialsCopper-free aluminum or stainless steel 316.
Enclosure ratingNEMA Type 4X, weatherproof, dust-tight, and watertight.

Configuration

Model660
Product typeUltraviolet Flame Detector
Product type definitionFlame Detectors (flame)
Ordering format[MODEL]-X X X X X
Fire type0 – Industrial temperature fire detector; 1 – High temperature fire detector
Housing material/conduit entry0 – Aluminum, 3/4-14 NPT (white); 2 – Stainless steel, 3/4-14 NPT; 3 – Aluminum, M20-1.5 (white); 5 – Stainless steel, M20-1.5
Test feature1 – Auto self-test
Fire relay configuration0 – Latching; 1 – Non-latching
Approvals0 – FM, CSA, IECEx, ATEX, SIL2, UKCA, ECAS-Ex, PESO, CE, EMC, LVD

High-temperature option

Available in a special high-temperature version rated from -40C to +125C (-40F to +257F).

Warranty coverage

Backed by a five-year warranty on sensors from the date of delivery, plus a three-year warranty on components and manufacturing defects.

120-degree field of view

Provides a wide 120-degree horizontal field of view to help cover larger areas with fewer detectors.

Long-range detection

Designed for fast flame detection where response time and coverage distance are critical.

Rugged housing

A robust, weatherproof enclosure designed for indoor or outdoor industrial environments.

Global approvals

Approved for regulated and hazardous areas, including FM, CSA, IECEx, ATEX, SIL2, UKCA, ECAS-Ex, and PESO.

Through-the-lens self-test

Automatic self-test helps verify detector operation and report a fault condition when sensing is impaired.

Explosion-proof design

Self-contained explosion-proof construction supports hazardous-area installations and harsh industrial conditions.

Field-configurable outputs

Supports field-configurable relays and sensitivity settings to match site requirements.

Microprocessor control

Uses microprocessor-based control for stable performance, diagnostics, and consistent operation.

Local status indication

High-intensity local indication supports quick visual verification of fire or fault status.

  • Swivel mount for all Aluminum 660/760/860 Flame detectors

    Material: Stainless Steel 304
    Part number: 20856

  • Swivel mount for all Stainless Steel 660/760/860 Flame detectors

    Material: Stainless Steel 316
    Part number: 24784

  • Pole mount 2″ for Swivel mount 20856

    Material: Stainless Steel 316L
    Part number: 26803

  • Pole mount 2″ for Swivel mount 24784

    Material: Stainless Steel 316
    Part number: 26807

  • Weather shield for all 660/860 Flame detectors

    Material: Stainless Steel 316L
    Part number: 23546

  • Air shield for all 660/860 Flame detectors

    Material: Delrin, Sintered Brass
    Part number: 8001023

  • Air shield for all 660 High-temp Flame detectors

    Material: Aluminum, Sintered Brass
    Part number: 26489

  • Test Gun for all 660 Flame detectors

    115VAC, USA, Canada
    Part number: 43808-2

  • Test Gun for all 660 Flame detectors

    100-240VAC
    Part number: 43808-3

  • Test Gun for all 660/860 Flame Detectors

    Part number: 540

  • Test Gun for all 660/760/860 Flame Detectors

    Part number: 545

Ready to configure Model 660?

Use the configurator to choose the right version and options for your site, then request a quote.